01-26-2008 07:40 PM - edited 03-05-2019 08:43 PM
Hi together
Which IOS would you recomment for the Catalyst 3750.
Only need OSPF on L3 Device and on L2 nothing special. Should be a stable one and the command ip tacacs source-interface should work (not working in 12.2(44)SE.
Thanks for your hints.
Regards
Markus
Solved! Go to Solution.
01-26-2008 08:20 PM
SED1 is more stable :)
01-26-2008 07:51 PM
c3750-advipservicesk9-mz.122-25.SED1.bin should be good. Make sure you've purchased the correct licenses for this feature set.
HTH,
__
Edison.
01-26-2008 07:56 PM
Hi
Thank you for the fast reply. I need only ipbase (l2) and ipservice (l3).
Regards
Markus
01-26-2008 08:03 PM
c3750-ipservices-mz.122-25.SED1.bin instead.
01-26-2008 08:09 PM
Thanks Edison. But I know how to handle IOS service categories. :)
I had just upgraded some switches to 12.2.44SE before and the tacacs source-interface command was gone...
But by the way, why not the 12.2.25.SEE4 ?
01-26-2008 08:20 PM
SED1 is more stable :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide