paolo bevilacqua Mon, 01/28/2008 - 02:49
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi, with the introduction of the new hwic-4t

http://cisco.com/en/US/prod/collateral/modules/ps5949/ps6182/prod_qas0900aecd80274424.html


Even a 2801 would do. Then it depend by the circuit speed, if all ports are 2mbps, a bigger router would be recommended.


Hope this helps, please rate post if it does!

royalblues Mon, 01/28/2008 - 02:58
User Badges:
  • Green, 3000 points or more

Paolo,


I think the user wants to terminate 11 links rather than 11 Mbps in which i case the minimum router that would be required is a 2811 with one HWIC-4T and 4 x WIC-2T


I completely agree that a 38XX would be the preferred router for terminating 11 V35 interfaces



Narayan


paolo bevilacqua Mon, 01/28/2008 - 03:49
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Narayan, why 4 x wic-2t ? With 3 x HWIC-4T you have 12 ports so one is spare. And still one empty HWIC slot.


When it comes to choosing the router, as you know, "it depends". In many places, links are still low speed so even a small 28xx does well.

royalblues Mon, 01/28/2008 - 03:59
User Badges:
  • Green, 3000 points or more

You are right as always


I mistook HWIC-4T for a NM-4T :-)


Narayan

paolo bevilacqua Mon, 01/28/2008 - 11:20
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You are welcome. As an appreciation to those that give useful answers, please rate posts with the scrollbox below!

Actions

This Discussion