cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
319
Views
4
Helpful
2
Replies

Session reset for appilcation

greg-bnets
Level 1
Level 1

Hi there i have an application in my DMZ wich connects the my server in on the local lan. We use a pix 515E. The thing is that from time to time the connection to the server on the lan is reset. the from the application i have to try 3 times before the connects gets up again. het is what is see in the log of the pix

Any suggestions how to fix this?

Jan 28 14:25:41 SRT: %PIX-6-302013: Built inbound TCP connection 776121 for outside:10.100.10.92/4058 (10.100.10.92/4058) to inside:10.10.10.1/8476 (10.100.10.100/8476)

Jan 28 14:25:41 SRT: %PIX-6-302014: Teardown TCP connection 776121 for outside:10.100.10.92/4058 to inside:10.10.10.1/8476 duration 0:00:01 bytes 326 TCP FINs

2 Replies 2

jojuarez
Level 1
Level 1

Hi,

Connection is being torn down because one of the ends is setting FIN flag on the TCP packet. This is not, however, an issue w/ the firewall.

You may run some traffic captures in order to determine which end is sending the FIN packet. Here's a good link for captures example:

http://www.computernetworkinghelp.com/content/view/40/1/

Hi juarez,

Thanks for your reply. Do you know by any chance what can cause on of the ends to send a FIN flag in the packet. Are there some reasons to that?

Thanks

Greg

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: