01-29-2008 07:22 AM
Hi,
I have to deploy the following scenario:
PPPoE Sessions terminated on a 802.1q GEth Subinterface on a 7206 Router.
It should be possible to put some customers (based on domain name) into a VRF (vrf-lite) instance.
The vrf-id should provided by a Radius Server.
Has anyone a similar config to give me a feedback or a useful link) ?
Thanks and regards,
Thomas
02-04-2008 10:45 AM
You can assign VRF membership to virtual-access interfaces using
a) Cisco-avpair = "lcp:interface-config#1=ip vrf forwarding
Cisco-avpair = "lcp:interface-config#2=ip unnumbered loopback
or
b) Cisco-avpair = "ip:vrf-id=
Cisco-avpair = "ip:ip-unnumbered=
Option a forces full Vaccess interfaces, option b works with virtual-access subinterfaces, but is not supported in all releases..
http://www.cisco.com/en/US/docs/ios/mpls/configuration/guide/mp_vpn_half_dup_vrf.html#wp1099246
02-06-2008 08:32 AM
Hi,
I have the same problem on Cisco 10008.. it seems that it can't go without RADIUS server.
Domagoj
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: