01-29-2008 07:40 AM
Hi,
Can somone please let me know how to configure a cisco box to send CRC errors in to SNMP/MIB polling server.
Ok what I want to do is to have CRC alerts in Netcool when they are increasing.
Thanks in advance.
01-29-2008 07:49 AM
You need to poll the object locIfInCRC
(.1.3.6.1.4.1.9.2.2.1.1.12) and setup Netcool for thresholds
-or-
you could setup rmon alarms/events for these objects:
01-29-2008 08:41 AM
Hi Davistan,
Thanks for your reply.
Can you please let me know whether I have to do any config on the device to enable locIfInCRC. or is it just config on the netcool server?
01-29-2008 09:23 AM
This is something you need to do on the netcool server. The MIBs are already built into the IOS and will respond to queries from netcool.
The only thing you will need to do on the device is enable snmp
snmp-server community public RO
01-30-2008 01:21 AM
Thanks Davistan. snmp-server community public RO is alrady enabled. will try on the server side.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide