01-29-2008 11:09 AM - edited 03-10-2019 03:57 AM
As the title says how do you cahne the management IP? I was told we could change it but now we can't access the device after reloading it to reset the password.
the current management IP is invalid.
IPS ver 6.0.3
ASA ver. 7.2.3
Solved! Go to Solution.
01-29-2008 11:44 AM
You need to use a comma instead of a space between the netmask and the default gateway.
"10.1.1.13/24,10.1.1.1" instead of "10.1.1.13/24 10.1.1.1"
01-29-2008 11:14 AM
You can session to the SSM module from the ASA.
ASA#session 1
login:
password:
SSM#config t
SSM(config)#service host
SSM(config-hos)host-ip
01-29-2008 11:37 AM
Getting invalid input when trying to change IP address. It looks like I'm following the format , any ideas?
the ^ is under the 10 in 10.1...
sensor(config-hos-net)# sh setting
network-settings
-----------------------------------------------
host-ip: 10.1.9.201/24,10.1.9.1
host-name: sensor
telnet-option: disabled
access-list (min: 0, max: 512, current: 0)
-----------------------------------------------
-----------------------------------------------
ftp-timeout: 300 seconds
login-banner-text:
-----------------------------------------------
sensor(config-hos-net)# host-ip 10.1.1.13/24 10.1.1.1
% Invalid input detected at '^' marker, The ip interface configuration, 10.1.1.13/24, format is invalid
sensor(config-hos-net)#
01-29-2008 11:44 AM
You need to use a comma instead of a space between the netmask and the default gateway.
"10.1.1.13/24,10.1.1.1" instead of "10.1.1.13/24 10.1.1.1"
01-29-2008 12:48 PM
Yep, figured that out just after I posted.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: