cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
341
Views
0
Helpful
2
Replies

2WAN support on 871

imranraheel
Level 1
Level 1

I have been informed that I can use one of the switch port in 871 to connect another WAN there. Is there any possibility I can actually use that for another or backup WAN connection if there is a way let me know a configuration link will be helpfull.

2 Replies 2

paolo bevilacqua
Hall of Fame
Hall of Fame

First of all you need the "advanced ip services" image, configure an additional vlan interface, and assign the port you want to it with "switchport mode access vlan XX".

Then, having dual ISP setup with redundancy can be a little complicated, however your starting document is:

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_configuration_example09186a00808d2b72.shtml

Note, the title is really misleading. The example does redundancy, but not load balancing.

Hope this helps, please rate post if it does!

dongdongliu
Level 1
Level 1

yes, you must configure a rest vlan interface to differentiate vlan be used by lan.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: