dial-peer ignoring translation-profile at AS5400XM

Answered Question

Im configuring an AS5400XM and im having some problems with diak-peers ignoring Voice translation-profiles outgoing, I want to translate for example the called 5212322808 to 2808. To test Im using

#csim start 5212322808. Below is the configuration and debug.

THANKS

!

voice translation-rule 10

rule 1 /^521232\(26[4-9].\)/ /\1/

rule 2 /^521232\(28[0-5].\)/ /\1/

!

voice translation-profile CYRA

translate called 10

!

dial-peer voice 50001 voip

description =====================> VOIP TO TUCCCMSUB01

translation-profile outgoing CYRA

preference 3

service session

destination-pattern 52123228[0-5].

voice-class codec 1

session target dns:TUCCCMSUB01

dtmf-relay cisco-rtp h245-signal h245-alphanumeric

ip qos dscp cs3 signaling

no vad

!

DEBUG

*Mar 31 03:09:37.487: xrule_checking

*Mar 31 03:09:37.487: xrule_checking calling , called 5212322808

*Mar 31 03:09:37.487: xrule_checking peer_tag 50001, direction 2, protocol 0

*Mar 31 03:09:37.487: xrule_checking Return rc = -5

I have this problem too.
0 votes
Correct Answer by Paolo Bevilacqua about 8 years 10 months ago

Yes, remember that csim will ignore translation profiles on DP, yet these configure at port or trunk level will work.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
smalkeric Tue, 02/05/2008 - 13:49

The calls are not getting matched to any of the translation profile. could you verify the configuration details.

You can refer this configuration guide for more information on configuring Translation profiles.

http://cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml

http://cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml

Actions

This Discussion