CNR 6.1.4 DHCP scope address state is pending-available?

Unanswered Question
Jan 30th, 2008
User Badges:

CNR 6.1.4 DHCP scope address state is pending-available?

scope address state is pengding-available,client can not get ip address from CHR DHCP SERVER,why ? how resolve this problem

Main CNR and backup CNR dhcp already synchronized.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
David Stanford Wed, 01/30/2008 - 19:22
User Badges:
  • Cisco Employee,

You mention that both servers are in sync, but this state general indicates some communication issue between main and backup.

You need to make sure that both servers can properly communicate with each other.

If you do:

nrcmd>dhcp getRelatedServers

What does it return?

Is the scope that is filled with pending-available created on the secondary server?

zhangxuejun Wed, 01/30/2008 - 19:39
User Badges:

hi,thanks for you replay.

main and backup server coummunication is OK.

when del main address scope,after sync,back server can be sync. look at back server ,this scop lease state display none state.but main server this scope address lease state still display pendig-available.

zhangxuejun Wed, 03/26/2008 - 23:20
User Badges:

a lot of thanks for you time meet this question,I will do this .If could not resolve ,open case in cisco support.


This Discussion