Routing Problem

Unanswered Question
Jan 31st, 2008
User Badges:

Hi there,


I have kind of a routing problem. At the moment I have a cisco 1800 Router (10.17.2.1) which is the default Gateway in a 10.17.0.0/16 Net. All traffic to other 10.x.x.x Networks is routed over the Routers MPLS WAN Port. The default Route (for all other non 10.x.x.x traffic i.e. Internet etc) points to 10.17.0.1 a Router which is our Internet GW.


How can I configure the C1800 to send all Internet bound Http/Https traffic through its MPLS WAN Port but all other non HTTP/HTTPS internet bound traffic to our local GW 10.17.0.1 ?


Hope you can help.


Best....Andy

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Thu, 01/31/2008 - 01:56
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi Andy


You need to look at Policy Based Routing which allows you to specify the next-hop based on criteria other than just the destination IP address.


http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a008075fae6.html


HTH


Jon


Actions

This Discussion