Cisco RPS

Unanswered Question
Jan 31st, 2008
User Badges:

We are planning to deploy a Cisco RPS 2300 with 3 x 2960-48 and 1 x 3750-48 and 1 x 3750G-12.


Looking at the Cisco RPS, I can see that it can only connect 4 devices. Here I have 5 devices. How will this work?


Also I am thinking if we go quasi redundant, does that mean, I have to re specify the request of the switches so that they are RPS compatible?


Thanks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Thu, 01/31/2008 - 07:20
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

The Cisco RPS 2300 allows you to connect up to 6 switches but only provides power to 2 active switches in an event of a power supply failure.


The switches listed above are supported on this model.


For more information, I recommend reading this presentation:


http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps7148/ps7130/prod_presentation0900aecd805bbf15.pdf


HTH,


__


Edison.

Actions

This Discussion