Overlapping NAT with Remote Access VPN

Answered Question
Jan 31st, 2008
User Badges:

Hello all,


My client has an ASA 5510 at the main location. We are in the process of turning up SSL VPN for their remote access needs. 30 or so remote users.


The problem, is that the main site has a 192.168.1.0/24 network number. The default number of Linksys routers purchased off the shelf at any store.


Obviously, by default, it doesn't work. When the users connect to the VPN from home, it connects, but network resources are unavailable.


I've been reading about overlapping NAT with site to site tunnels, but what about remote access? Can that be accomplished as well?


Any help to point me in the right direction would be much appreciated.


Thanks!

Correct Answer by jbayuka about 9 years 5 months ago

Refer to the document PIX/ASA 7.x and later: Site to Site (L2L) IPsec VPN with Policy NAT (Overlapping Private Networks) Configuration Example for more information

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00808c9950.shtml

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.

Actions

This Discussion