Adding QoS between ASA and Cisco 877 VPN possible?

Unanswered Question
Feb 1st, 2008

I will be upgrading our Pix and Concentrator to 2 x ASA 5520's soon (Active /standby). I will move the Site-to-Site VPN's over but I was then thinking is it possible to add QoS from the ASA's to the Cisco VPN routers at our remote offices?

These small offices use Cisco 877's and 1841's on DSL lines with the NBAR option turned on.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
bwilmoth Thu, 02/07/2008 - 06:52

In order to implement the QOS, complete these steps:

Identify the traffic or define the traffic classes.

Associate actions with each traffic class in order to formulate policies with the use of Policy Map.

Issue the service-policy command in order to activate the policies.

Use the service-policy command in order to apply the policy map globally or to a specific interface.

John Rumball Mon, 02/11/2008 - 06:52

What config changes need to be made on the router at the remote end?

I have a very similar requirement... trying to figure out how to implement QoS/VoIP between an ASA5520 and Cisco 871s on DSL/Cable.



This Discussion