SSID assignment

Unanswered Question
Feb 1st, 2008
User Badges:

We plan on implementing a WLC4402/1252 APs at one of our locations. Currently we use "fat" 1242 APs in selected areas and also deploy MS-PEAP using a Microsoft RADIUS server. We would like to have the ability to assign SSIDs based on Active Directory user logins while keeping MS-PEAP in place. I saw some documentation that showed the WLC using a Microsoft RADIUS server for dynamic VLAN assignment. I am wondering if there is anyway to assign SSIDs as well VLAN based on AD user credentials using the WLC. Or perhaps the dynamic VLAN assignment is enough?


Any information, docs, examples configs, etc would be greatly appreciated. Thx.


Joe

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Rob Huffman Sat, 02/02/2008 - 10:45
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Joe,


I think your last statement is correct :) For what you are trying to do Dynamic Vlan Assignment should be all you need. The SSID portion becomes unnecessary when using this config.


http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml


Hope this helps!

Rob

Actions

This Discussion

 

 

Trending Topics - Security & Network