02-01-2008 07:33 AM - edited 03-15-2019 08:34 AM
Hi to all,
problaby my question is stupid, but I don't know to resolve.
I have a CME on 2811, for each incoming calls it strip the first left zero digit of number (DID).
Can I with translation rule put this zero? Or better can I prevent any digit stripping of incoming calls?
Augusto
Solved! Go to Solution.
02-01-2008 07:38 AM
Augusto, CME is not stripping anything, it's the normal way of TI to present numbers this way, as they use ISND type/plan.
The translation-rule below, will prefix 0 for fixed number, 00 for international, nothing for cellulars:
voice translation-profile addzero
translate calling 10
voice translation-rule 10
rule 1 // /0/ type national national
rule 2 // /00/ type international international
int bri x/y
trunk-group bri
trunk group bri
translation-profile incoming addzero
Hope this helps, please rate post if it does!
02-01-2008 07:35 AM
Augusto,
Can you post your config?
Brandon
02-01-2008 07:38 AM
Augusto, CME is not stripping anything, it's the normal way of TI to present numbers this way, as they use ISND type/plan.
The translation-rule below, will prefix 0 for fixed number, 00 for international, nothing for cellulars:
voice translation-profile addzero
translate calling 10
voice translation-rule 10
rule 1 // /0/ type national national
rule 2 // /00/ type international international
int bri x/y
trunk-group bri
trunk group bri
translation-profile incoming addzero
Hope this helps, please rate post if it does!
02-01-2008 07:49 AM
Hi Paolo,
you understand exactly my problem (yes I know it's TI issue), thank now it's OK.
Augusto.
02-01-2008 07:53 AM
You are welcome, thanks for the nice rating and buona fortuna!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide