02-01-2008 09:28 AM - edited 03-11-2019 04:57 AM
I have a failover pair of PIX 525's (in production) and want to upgrade the firmware on both of them (probably from 6.3 to 6.35 and maybe later on to 7.x). With the failover pair - should I power one down and do the upgrade on the other first, then power up the second and do that one ? Is there a recommended sequence here with upgrading them ? I thought I heard somewhere you need to be careful how you do these upgrades with a failover pair
02-01-2008 09:58 AM
What type of configuration do you have? Active/Standby Configuration?
02-01-2008 02:24 PM
The set-up is Active/Standby
02-03-2008 09:46 PM
Hi,
Here's the procedure:
http://www.cisco.com/en/US/docs/security/asa/asa70/pix_upgrade/upgrade/guide/pixupgrd.html#wp1654199
02-04-2008 03:58 AM
excellent thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide