1200 AP VLAN's

Unanswered Question
Feb 1st, 2008
User Badges:

I am at a Customer Site whom has a Switch Fabric of about 30 switches across their Campus.

the Customer is running about 15 Production VLAN's across the Switch Fabric.

They also have the 1200 Series AP plugged into only one of the VLAN's (i.e., the switch port that the AP connects to is in only 1 VLAN; not a trunk port.

Can the AP be configured to participate in the wired VLAN's??


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
dmantill Fri, 02/01/2008 - 17:17
User Badges:
  • Silver, 250 points or more

HEllo K-melton.



If what you want is that :

wireless clients associate to and SSID for vlan1.

And the AP belong to another vlan (Vlan4 as an example)


-Yes this is possible.


but

-switchport must be set as trunk allowing only these 2 vlans.

-Vlans must be configured on the AP.(under services on the gui interface)

-SSID must be attached to a VLAN. (under SSID manager)


dmantill@cisco.com



Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode