02-01-2008 11:17 AM - edited 03-05-2019 08:53 PM
Hi everybody,
I'm actually having a problema with a 2800 router. The issue is that it was working well. I turn it off to move from one rack to other,and then it never has come up again.
This is the output of what i see when i turn it on:
Readonly ROMMON initialized
boot: cannot open "flash:"
boot: cannot determine first executable file name on device "flash:"
After this, I am able only to rommon prompt.
I used the same flash memory in other router and it works well...
Is it a hardware failure then?
thanks and regards....
02-01-2008 11:23 AM
For the symptoms described, my first suggestion would be to make sure that the flash/compact flash is correctly and firmly seated. Then try to boot again.
HTH
Rick
02-01-2008 12:22 PM
I did it and the same behavior occurs.
Removed the flash and installed again, the same result....
I Used the flash in other router...and it works well...
I will try a new flash in the router to see what happens....
regards,
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: