How to take out WCCP completely..?

Unanswered Question
Feb 4th, 2008
User Badges:
  • Gold, 750 points or more

Hi All,

We have WAEs between 2 sites and would like to take out all the commands and the equipmwent from network. Commands added on both end routers (RTRA & RTRB:

Global config mode:

ip wccp version 2

ip wccp 61

ip wccp 62

Interface mode:

ip wccp 61 redirect in

ip wccp 62 redirect out

RTRA is Hub router connects to several satellite offices and WCCP enabled for only one Satellite office (where RTRB existing).

I started tyo takeout WCCP with interface commands like:

no ip wccp 61 redirect in

no ip wccp 62 redirect out

But no such commands exists.

So, please advise on sequence and proper commnads to tak eout WCCP services from routers.

Thank you in advace


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
aghaznavi Fri, 02/08/2008 - 13:29
User Badges:
  • Silver, 250 points or more

To remove Web Cache Communication Protocol (WCCP) statistics (counts) maintained on the router for a particular service, use the clear ip wccp command in EXEC mode.

clear ip wccp {web-cache | service-number}


This Discussion