Hi All,
We have WAEs between 2 sites and would like to take out all the commands and the equipmwent from network. Commands added on both end routers (RTRA & RTRB:
Global config mode:
ip wccp version 2
ip wccp 61
ip wccp 62
Interface mode:
ip wccp 61 redirect in
ip wccp 62 redirect out
RTRA is Hub router connects to several satellite offices and WCCP enabled for only one Satellite office (where RTRB existing).
I started tyo takeout WCCP with interface commands like:
no ip wccp 61 redirect in
no ip wccp 62 redirect out
But no such commands exists.
So, please advise on sequence and proper commnads to tak eout WCCP services from routers.
Thank you in advace
MS