WS-X6748-GE-TX and auto mdix

Answered Question
Feb 4th, 2008

Hi,

Can I use auto mdix on WS-X6748-GE-TX card with native IOS ?

I read some information that with Catos the command is supported but nothing about IOS.

Regards

I have this problem too.
0 votes
Correct Answer by andrew.butterworth about 6 years 2 months ago

According to the command reference for the Sup32 the 'mdix auto' command is available for the WS-X6748-GE-TX:

http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/I1.html#wp1684741

It does state the command was added in 12.2(18)ZY for the Sup32 so if you have a Sup720 or an older Sup2/MSFC2 then it might be different.

Andy

  • 1
  • 2
  • 3
  • 4
  • 5
Average Rating: 5 (1 ratings)
Correct Answer
andrew.butterworth Mon, 02/04/2008 - 09:51

According to the command reference for the Sup32 the 'mdix auto' command is available for the WS-X6748-GE-TX:

http://www.cisco.com/en/US/partner/docs/switches/lan/catalyst6500/ios/12.2ZY/command/reference/I1.html#wp1684741

It does state the command was added in 12.2(18)ZY for the Sup32 so if you have a Sup720 or an older Sup2/MSFC2 then it might be different.

Andy

Actions

Login or Register to take actions

This Discussion

Posted February 4, 2008 at 8:23 AM
Stats:
Replies:1 Avg. Rating:5
Views:754 Votes:0
Shares:0
Tags: No tags.

Discussions Leaderboard

Rank Username Points
1 15,007
2 8,155
3 7,745
4 7,088
5 6,747
Rank Username Points
135
83
80
69
38