02-04-2008 09:05 AM
I'm new to the UC500 and don't know how to set the voice from point to point into point to multi point, i'm using KPN euro ISDN multi point ? can some one help me out?
02-04-2008 09:51 AM
By default, the ISDN BRI is set for multipoint. In this case is recommended that you use "isdn tei-negotiation preserve" under BRI interface.
If you want point-to-point, use "isdn static-tei 0".
Hope this helps, please rate post if it does!
02-04-2008 10:10 AM
Dear p.bevilacqua,
I do question that, i use a not multi isdn and than it's working when i do use the multi isdn it's not working.
Thanx andy
02-04-2008 10:15 AM
Which exact IOS are you using ?
02-04-2008 10:36 AM
I don't know at the moment. I'm not at the location where the UC500 is placed. Didn't set SSH open for i-net at the moment so can't login remote.
Why is there a trouble with older ones?
02-04-2008 11:12 AM
You need to run 12.4(11)XW5, previous ones are buggy.
02-04-2008 12:48 PM
Thanx for the info i'll try it tommorow
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide