RME and NAMs

Answered Question
Feb 4th, 2008
User Badges:

I've added all of our NAM devices into the DCR and the inventory recognises them as WS-SVC-NAM-2 however it won't do a sync archive.


We are running RME 4.0.5 and CS 3.0.5.


The NAMS are running software ver:3.5(1)

and 3.4(1a).


I've also turned on exsession at the cmd line. The username and password are set, I have not set the enable. SNMP READ and READ WRITE are ok.??


Correct Answer by Joe Clarke about 9 years 3 months ago

What error do you get trying to sync archive on the 3.4 NAMs? If you perform a sniffer trace while syncing archive, what errors or problems do you see in the telnet session?


Note: NAMs running 3.5 will fail until you upgrade to RME 4.0.6 due to CSCsh27562. However, the 3.4 NAMs should be working.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
Joe Clarke Mon, 02/04/2008 - 20:44
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

What error do you get trying to sync archive on the 3.4 NAMs? If you perform a sniffer trace while syncing archive, what errors or problems do you see in the telnet session?


Note: NAMs running 3.5 will fail until you upgrade to RME 4.0.6 due to CSCsh27562. However, the 3.4 NAMs should be working.

Actions

This Discussion