Router Replacment Problem

Unanswered Question
Feb 4th, 2008

I want to replace a faulty router with new one,i did all configuration as the old one,attached the new and it is not working,this is the configuration of both. I do apprecite any help.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Goutam Sanyal Tue, 02/05/2008 - 00:15

post the details - what is not working exactly? Or you can check the Ports (Serial/fast-Giga Ethernet) are not administratively down.



Please rate if it works

aijaz802 Tue, 02/05/2008 - 02:21

Also check the serial interfaces. The interface numbers might not be matching with the physical connections.

Rate if this works....

Danilo Dy Tue, 02/05/2008 - 03:40


Thus the faulty router and replacement router the same model and running the same IOS version/feature set?

Take note that if the model is different, module slot/interface number may differ. Also, if the model is different, module from the old router may not be compatible to the replacement router (i.e. firmware/release verion).

If the IOS version/feature set is different, some configuration lines from the faulty router may not be available in the replacement router.




This Discussion