Pix 7.2(1) mroute

Unanswered Question
Feb 5th, 2008


In my Pix(Pix 515E, image 7.2(1)) configuration I discovered strange thing.

When I use this command

"mroute If_Out"

, then wr mem and reload everything is ok, that means after reboot this command is still in running config.

Then, when I define

"name Net_Dmz2", then

"sh run | grep mroute", I can see output

"mroute Net_Dmz2 If_Out". Still ok.

The same is when I do wr mem, so in startup-config I can see

"mroute Net_Dmz2 If_Out".

But the problem is when I do reload. Then after this command

"sh run | grep mroute" I can see nothing.

No mroute.

About as if the pix can't resolve symbolic name defined in name command.

Do you have any idea about this problem?

Many thanks.


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion