CME multiple SIP providers

Unanswered Question
Feb 6th, 2008

Hi at all,

I would like to configure multiple sip trunk on cme 4. There is any way to this?

Thanks, Bye!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Paolo Bevilacqua Wed, 02/06/2008 - 09:50

Yes, but there are issues for authentication.

The ideal would be to be assigned the same username and password for both, I realize this may be impossible.

npservice Thu, 02/07/2008 - 01:00

Thanks for your response,

look my config below:


dial-peer voice 1 voip

preference 1

destination-pattern .T

voice-class codec 1

session protocol sipv2

session target

dtmf-relay rtp-nte


dial-peer voice 2 voip

preference 2

destination-pattern 5T

voice-class codec 1

session protocol sipv2

session target

incoming called-number 5311402



authentication username 053* password *

no remote-party-id

registrar expir 3600



I have noticed that I can configure only 1 registrar and only 1 sip-server on sip-ua config.

Let me know if there is another method to do this, I would like to use 2 or 3 registrar an sip-server...

Thanks, Bye!!!


This Discussion