02-06-2008 08:40 AM - edited 03-15-2019 08:39 AM
Hi at all,
I would like to configure multiple sip trunk on cme 4. There is any way to this?
Thanks, Bye!
02-06-2008 09:50 AM
Yes, but there are issues for authentication.
The ideal would be to be assigned the same username and password for both, I realize this may be impossible.
02-07-2008 01:00 AM
Thanks for your response,
look my config below:
!
dial-peer voice 1 voip
preference 1
destination-pattern .T
voice-class codec 1
session protocol sipv2
session target dns:voip.eutelia.it:5060
dtmf-relay rtp-nte
!
dial-peer voice 2 voip
preference 2
destination-pattern 5T
voice-class codec 1
session protocol sipv2
session target dns:sip.messagenet.it:5061
incoming called-number 5311402
!
sip-ua
authentication username 053* password *
no remote-party-id
registrar dns:voip.eutelia.it:5060 expir 3600
sip-server dns:voip.eutelia.it:5060
!
I have noticed that I can configure only 1 registrar and only 1 sip-server on sip-ua config.
Let me know if there is another method to do this, I would like to use 2 or 3 registrar an sip-server...
Thanks, Bye!!!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide