CME multiple SIP providers

npservice · ‎02-06-2008

Hi at all,

I would like to configure multiple sip trunk on cme 4. There is any way to this?

Thanks, Bye!

paolo bevilacqua · ‎02-06-2008

Yes, but there are issues for authentication.

The ideal would be to be assigned the same username and password for both, I realize this may be impossible.

npservice · ‎02-07-2008

Thanks for your response,

look my config below:

!

dial-peer voice 1 voip

preference 1

destination-pattern .T

voice-class codec 1

session protocol sipv2

session target dns:voip.eutelia.it:5060

dtmf-relay rtp-nte

!

dial-peer voice 2 voip

preference 2

destination-pattern 5T

voice-class codec 1

session protocol sipv2

session target dns:sip.messagenet.it:5061

incoming called-number 5311402

!

sip-ua

authentication username 053* password *

no remote-party-id

registrar dns:voip.eutelia.it:5060 expir 3600

sip-server dns:voip.eutelia.it:5060

!

I have noticed that I can configure only 1 registrar and only 1 sip-server on sip-ua config.

Let me know if there is another method to do this, I would like to use 2 or 3 registrar an sip-server...

Thanks, Bye!!!