Unanswered Question
Feb 6th, 2008
User Badges:

I understand that I need to do the following for mgcp


mgcp call-agent ........ service......version 0.1

ccm-manager mgcp

If I want CCM to download everything else I need the following ?

ccm-manager config server x.x.x.x - ip address of ccm

ccm-manager config

If I have FXS port on the GW as well do I need the following

Add the MGCP applicationciation to the Dial Peers for the ports or can I just configure them in CCM ?

Is this correct ?


I have a bundled SRST from Cisco, how do I know the S/W level of it - sh ver? what do I look for ?

Also If I have SRST with the router do I just need to add the following

ccm-manager fallback-mgcp







service alternative default - for h323 only

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rajesh Revuru Wed, 02/06/2008 - 11:21
User Badges:
  • Silver, 250 points or more

type in "sh call-manager all" and it will display SRST version at the top.

You would have to define ephone-dn and ephone as minimum to enable SRST after you type ccm-manager fallback-mgcp


This Discussion