QOS configurations for Nortel VoIP

sandy.butler · ‎02-06-2008

I am in need of Access List and Class map statements for a Cisco 3620 to set up QOS for Nortel CS1000M PBX's.

If anyone has dealt with this issue, I would greatly appreciate a copy of the config.

Thanks in advance.

umedryk · ‎02-12-2008

Use the auto qos voip interface configuration command to automatically configure quality of service (QoS) for voice over IP (VoIP) within a QoS domain. Use the no form of this command to return to the default setting.

auto qos voip {cisco-phone | cisco-softphone | trust}