catalyst 4006 chassis with CATALYST 4500 SUPERVISOR V

Unanswered Question
Feb 7th, 2008
User Badges:

Hi Experts,


Can I use CATALYST 4500 SUPERVISOR V(WS-X4516) in an old 6-slot catalyst 4006 chassis( WS-C4006). I want to run the latest IOS available and I have the following line cards:

WS-X4232-RJ-XX

WS-X4418-GB

WS-X4148-RJ


thanks and regards

alex

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Jon Marshall Thu, 02/07/2008 - 02:20
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Hi Alex


Yes you can run the Sup V in the 4006 chassis. See this link


http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/hardware/module/guide/01overvw.html#wp1015031


The Sup V also supports the WS-X4418-GB and WS-X4148-RJ modules - see attached link


http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/product_data_sheet09186a00801fcaba_ps2797_Products_Data_Sheet.html


HTH


Jon

Actions

This Discussion