02-07-2008 04:03 AM - edited 02-21-2020 03:32 PM
I have configured Remote access VPN in ASA 5520 ,ver7.2.It's connecting from outside by using cisco VPN client.but after connecting I am unable to ping any inside host.It's not pinging firewall inside interface also.
Please guide me into this matter.
Thanks
som
02-07-2008 06:28 AM
Could you post the config?
Check the config for "crypto isakmp nat-traversal".
Also, to ping the inside interface you need to add "management-access inside".
02-07-2008 11:09 AM
I had the same problem on an IOS router (871). My solution was one of two things. I downloaded the most up-to-date version of the VPN client (5.0.02.90) as opposed to the version I had or it was a software firewall (Norton 360). I have two different computers. One works just fine...the other connects but no traffic passes through. Here is what I have:
Computer 1 (working)- VPN Client v5.0.02.0090 and Network Associates Enterprise VirusScan.
Computer 2 (not working) - VPN Client v5.0.00.0340 and Norton 360.
I highly doubt it is the VPN Client, but sometimes you never know. Check your software firewall and try disabling it. Let me know how this works.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide