2 Routers 877

Unanswered Question
Feb 7th, 2008
User Badges:

Regards to all, I have to realize a configuration of a simple VPN, in a point I have this ip address: 80.38.x.x, with this LAN: 192.168.1.x And in other one sedate I have this ip address it publishes: 80.37.x.x, with this LAN: 172.26.0.x.

That configuration would have to apply for his(her,your) functioning? Thanks to all

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
aijaz802 Sat, 02/09/2008 - 00:27
User Badges:
  • Bronze, 100 points or more

Hi,


You can create a IPSEC/GRE tunnel b/w them... The following is example for GRE..



Site A

---------------

interface Tunnel1

description VPN Tunnel to Site B.

ip address 192.168.201.1 255.255.255.252 (use any unused ip with /30 mask)

tunnel source DialerXXXX

tunnel destination 80.37.x.x


ip route 172.26.0.x 255.255.255.0 Tunnel1

ip route 0.0.0.0 0.0.0.0 Dialerxx

ip route 80.37.x.x 255.255.255.255 Dialerxxx


Site B

---------------

interface Tunnel1

description VPN Tunnel to Site A.

ip address 192.168.201.2 255.255.255.252 (use any unused ip with /30 mask)

tunnel source DialerXXXX

tunnel destination 80.38.x.x


ip route 192.168.1.x 255.255.255.0 Tunnel1

ip route 0.0.0.0 0.0.0.0 Dialerxx

ip route 80.38.x.x 255.255.255.255 Dialerxxx



You need to configure the dialer setting for ADSL.



Rate this if it helps..


*aijaz*

Actions

This Discussion