Hi I have been asked by my company to set up a phone system after 2 days of playing with it. Suprisingly most of it is working but I don't seem to be able to get any outgoing or incoming calls. I have got closer with debugging but now seem to have hit a wall I would really apreciate any help you can give.
The debug seems to suggest that the voice port needs to be added to the trunking group but if I try this I get a error to do with analog and digital ports not being allowed on this port, sorry I have to leave the system unplugged during work hours and stupidly did not note the exact error.
Again thank you in advance for helping me with this.
I have a 2801 with 2 8 channel dsps, and a 2 port isdn vic. incoming are 2 bt isdn2e's
Just logged on and I did take a copy of the error when I try to add the trunking group
Failed to add non-analog port to trunk group
Hi, not sure who suggested you to configure it network side but that is the culprint! Please configure:
int bri ...
isdn protocol-emulate user
isdn layer1-emulate user
then you may or may not need the tei 0.