ISDN Backup with Cisco 876 for IPSEC (Lan-To-Lan) Connection

Unanswered Question
Feb 8th, 2008
User Badges:

hello,


i must configure a backup solution for a ipsec soho connection with pppoe dialin.

config for ipsec ( works fine):


!


!

hostname test

!


!

crypto isakmp policy 10

encr 3des

hash md5

authentication pre-share

group 2

crypto isakmp key xxx

address 1.2.3.4

!

!

crypto ipsec transform-set ciscovpn esp-3des esp-md5-hmac

!

crypto map ciscovpn 10 ipsec-isakmp

set peer 1.2.3.4

set transform-set ciscovpn

match address 191

!

!

!

!

interface BRI0

no ip address

shutdown

!

!

interface FastEthernet0

description LAN

!

interface FastEthernet1

shutdown

!

interface FastEthernet2

shutdown

!

interface FastEthernet3

description WAN Modem

switchport access vlan 2

pppoe enable group global

!

interface Vlan1

description LAN

ip address 10.1.1.17 255.255.255.240

!

interface Vlan2

description WAN Modem

no ip address

pppoe enable group global

pppoe-client dial-pool-number 1

!

interface Dialer1

ip address negotiated

ip mtu 1456

encapsulation ppp

dialer pool 1

dialer-group 1

keepalive 300

no cdp enable

ppp authentication chap callin

ppp chap hostname getin

ppp chap password getin007

crypto map ciscovpn

!

ip route 0.0.0.0 0.0.0.0 Dialer1

!

!

access-list 191 permit ip 10.1.1.16 0.0.0.15 10.1.10.160 0.0.0.15

access-list 191 permit ip 10.1.10.160 0.0.0.15 10.1.1.16 0.0.0.15

!

dialer-list 1 protocol ip permit


Must i configure a dynamic routingprotokoll, or the IP SLA feature`?

i havent found a good example on the CCO


thanks in advance :-)

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
mchin345 Thu, 02/14/2008 - 06:55
User Badges:
  • Silver, 250 points or more

Go through this document (Cisco 800 Series Routers Configuration examples) .

http://cisco.com/en/US/products/hw/routers/ps380/prod_configuration_examples_list.html

See this two examples

1.Configuring a Router-to-Router LAN-to-LAN Tunnel with a Router Initiating IKE Aggressive Mode

2.Configuring an IPsec Router Dynamic LAN-to-LAN Peer and VPN Clients

Actions

This Discussion