1200 AP configuration question

Answered Question
Feb 8th, 2008
User Badges:

I am setting up a 1200 AP. If you go to >Network Interfaces >Radio0-802.11g >Settings, there is a setting for "External Antenna Configuration". I am using an external Hi-gain antenna. Do I set this to enabled? And if yes, it doesn't want to accept the dbi setting even though it seems to me to be within the accepted range. Any assistance is appreciated.

Correct Answer by Rob Huffman about 9 years 1 month ago

Hi Johnny,


In AP mode this is not a requirement. My understanding of this setting is that it comes into play in Bridge or WGB modes.


http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml


Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Fri, 02/08/2008 - 07:25
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Johnny,


In AP mode this is not a requirement. My understanding of this setting is that it comes into play in Bridge or WGB modes.


http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml


Hope this helps!

Rob

Actions

This Discussion