Solved: 1200 AP configuration question - Cisco Community

446

Views

0

Helpful

1

Replies

I am setting up a 1200 AP. If you go to >Network Interfaces >Radio0-802.11g >Settings, there is a setting for "External Antenna Configuration". I am using an external Hi-gain antenna. Do I set this to enabled? And if yes, it doesn't want to accept the dbi setting even though it seems to me to be within the accepted range. Any assistance is appreciated.

1 Accepted Solution

Accepted Solutions

Hi Johnny,

In AP mode this is not a requirement. My understanding of this setting is that it comes into play in Bridge or WGB modes.

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml

Hope this helps!

Rob

View solution in original post

1 Reply 1

Hi Johnny,

In AP mode this is not a requirement. My understanding of this setting is that it comes into play in Bridge or WGB modes.

http://www.cisco.com/en/US/products/hw/wireless/ps458/products_configuration_example09186a00805b9b87.shtml

Hope this helps!

Rob

Learn, share, save

Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.

New here? Get started with these tips. How to use Community New member guide

Log in to Community

Review Cisco Networking products for a $25 gift card