Frame Relay Traffic Shaping

Unanswered Question
Feb 8th, 2008
User Badges:

Hi all,


I have an issue where I will have to change the traffic shaping parameters. This will be done off hours, but I am wondering what the best practice for this is. Should I edit the current map-class or create another map-class and swap out the interface configuration. Here is the configuration I will be changing.


Change from:

map-class frame-relay shapeforT1

frame-relay cir 768000

frame-relay bc 7680

frame-relay be 0

service-policy output IPFRCOS


Change to:

map-class frame-relay shapeforT1

frame-relay cir 729600

frame-relay bc 7296

frame-relay be 0

service-policy output IPFRCOS


Thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Fri, 02/08/2008 - 10:38
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

You could edit the current map-class without any problems. I've done it plenty of times.


___


Edison.

ssteichmann Fri, 02/08/2008 - 12:23
User Badges:

I would just edit the current map, especially if traffic will be low.

Actions

This Discussion