cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
719
Views
0
Helpful
5
Replies

Error, please help!!!!

cisco24x7
Level 6
Level 6

whenever I do "sh run", I get nothing.

If I do "show start", I get the following

error:

C2621#sh start

Using 10783 out of 29688 bytes, uncompressed size = 25550 bytes

%No memory availableCouldn't uncompress config (-1)

%Error opening nvram:/startup-config (Uncompression Failed)

Basically, I can not see the running

config and start-up configuration unless

I reboot the router (IOS with Firewall

Feature set). Anyone know why?

I delete the nvram:private-config but it does not help. Can anyone help?

C2621#sh ver

Cisco Internetwork Operating System Software

IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(24a), RELEASE SOFTWARE (fc1)

Copyright (c) 1986-2007 by cisco Systems, Inc.

Compiled Tue 18-Dec-07 19:01 by stshen

Image text-base: 0x80008098, data-base: 0x81A1E370

ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)

C2621 uptime is 18 hours, 17 minutes

System returned to ROM by power-on

System restarted at 02:45:35 UTC Sun Feb 10 2008

System image file is "flash:c2600-ik9o3s3-mz.123-24a.bin"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to

export@cisco.com.

cisco 2621 (MPC860) processor (revision 0x102) with 59392K/6144K bytes of memory.

Processor board ID JAD12345X7 (123456787)

M860 processor: part number 0, mask 49

Bridging software.

X.25 software, Version 3.0.0.

3 FastEthernet/IEEE 802.3 interface(s)

32K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

C2621#

C2621#

C2621#sh run

C2621#

C2621#

C2621#sh start

Using 10783 out of 29688 bytes, uncompressed size = 25550 bytes

%No memory availableCouldn't uncompress config (-1)

%Error opening nvram:/startup-config (Uncompression Failed)

C2621#wr mem

startup-config file open failed (Not enough space)

C2621#

C2621#dir flash:

Directory of flash:/

1 -rw- 16077544 Mar 1 1993 00:04:41 +00:00 c2600-ik9o3s3-mz.123-24a.bin

16252924 bytes total (175316 bytes free)

C2621#dir nvram:

Directory of nvram:/

13 -rw- 10783 <no date> startup-config

14 ---- 4275 <no date> private-config

1 -rw- 0 <no date> ifIndex-table

2 ---- 13 <no date> persistent-data

29688 bytes total (12530 bytes free)

C2621#

5 Replies 5

sivakondalarao
Level 1
Level 1

Hi,

when this problem started, after IOS upgradation?

regards

skrao

It just started recently. NO IOS upgrade.

CCIE Security

Hi,

what about switch functionality. It is clear that show start and show run commands are not displaying configuration.

what about other commands and switch functionality.

regards

skrao

The router is working and passing traffics

just fine. Other commands such as "show

interface" and "reload" work. After

about 2 hours, I can not even telnet/ssh

into the router anymore and it required

a power OFF/ON.

CCIE Security

Hi,

Are you able to capture the log/console messages during problem.

Please post your tech support file.

If possible try with different IOS image even the current IOS worked fine for quiet some time.

regards

skrao

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: