02-10-2008 01:11 PM - edited 03-11-2019 05:01 AM
whenever I do "sh run", I get nothing.
If I do "show start", I get the following
error:
C2621#sh start
Using 10783 out of 29688 bytes, uncompressed size = 25550 bytes
%No memory availableCouldn't uncompress config (-1)
%Error opening nvram:/startup-config (Uncompression Failed)
Basically, I can not see the running
config and start-up configuration unless
I reboot the router (IOS with Firewall
Feature set). Anyone know why?
I delete the nvram:private-config but it does not help. Can anyone help?
C2621#sh ver
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(24a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Tue 18-Dec-07 19:01 by stshen
Image text-base: 0x80008098, data-base: 0x81A1E370
ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1)
C2621 uptime is 18 hours, 17 minutes
System returned to ROM by power-on
System restarted at 02:45:35 UTC Sun Feb 10 2008
System image file is "flash:c2600-ik9o3s3-mz.123-24a.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
cisco 2621 (MPC860) processor (revision 0x102) with 59392K/6144K bytes of memory.
Processor board ID JAD12345X7 (123456787)
M860 processor: part number 0, mask 49
Bridging software.
X.25 software, Version 3.0.0.
3 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
C2621#
C2621#
C2621#sh run
C2621#
C2621#
C2621#sh start
Using 10783 out of 29688 bytes, uncompressed size = 25550 bytes
%No memory availableCouldn't uncompress config (-1)
%Error opening nvram:/startup-config (Uncompression Failed)
C2621#wr mem
startup-config file open failed (Not enough space)
C2621#
C2621#dir flash:
Directory of flash:/
1 -rw- 16077544 Mar 1 1993 00:04:41 +00:00 c2600-ik9o3s3-mz.123-24a.bin
16252924 bytes total (175316 bytes free)
C2621#dir nvram:
Directory of nvram:/
13 -rw- 10783 <no date> startup-config
14 ---- 4275 <no date> private-config
1 -rw- 0 <no date> ifIndex-table
2 ---- 13 <no date> persistent-data
29688 bytes total (12530 bytes free)
C2621#
02-11-2008 02:51 AM
Hi,
when this problem started, after IOS upgradation?
regards
skrao
02-11-2008 04:21 AM
It just started recently. NO IOS upgrade.
CCIE Security
02-11-2008 04:44 AM
Hi,
what about switch functionality. It is clear that show start and show run commands are not displaying configuration.
what about other commands and switch functionality.
regards
skrao
02-11-2008 05:11 AM
The router is working and passing traffics
just fine. Other commands such as "show
interface" and "reload" work. After
about 2 hours, I can not even telnet/ssh
into the router anymore and it required
a power OFF/ON.
CCIE Security
02-11-2008 09:19 PM
Hi,
Are you able to capture the log/console messages during problem.
Please post your tech support file.
If possible try with different IOS image even the current IOS worked fine for quiet some time.
regards
skrao
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide