pcameron Sun, 02/10/2008 - 16:45

If you want to assign one of your DID's for the hunt group, you can do the following:


Assuming you have the following DID range on the BRI services -


BRI 1 - 555101X

BRI 2 - 555102X


You use internal extensions in the range 10XX and you want the number 5551029 to ring direct to you hunt group 5001.


!

voice translation-rule 567

rule 1 /^5551029/ /5001/

rule 2 /^55510\(..\)/ /10\1/

!

(this will translate numbers in the range 5551000 - 5551028 to 1000 - 1028, and 5551029 will be translate to 5001)


!

voice translation-profile Hunt_Group

translate called 567

!



!

voice-port 0/0/0

description - BRI 1

compand-type a-law

cptone AU

translation-profile incoming Hunt_Group

!

voice-port 0/1/0

description - BRI 1

compand-type a-law

cptone AU

translation-profile incoming Hunt_Group

!




hotrot_net Mon, 02/11/2008 - 01:03

The problem is that I only have 1 DID namely


493440075 thats the only DID i have got I want that to ring on hunt group 5001


Greetings Andy

pcameron Mon, 02/11/2008 - 03:25

Providing the telco sends all the digits in the setup message, make the translation rule like this -


!

voice translation-rule 567

rule 1 /^493440075/ /5001/


Otherwise run debug ISDN q931 and look at whatever the called number is in the setup message. Change the number in the voice translation rule to suit.


Actions

This Discussion