02-11-2008 02:19 AM - edited 03-13-2019 04:57 PM
hi Guys,
i need help on configuration of a port which is connected to avaya phone. the data vlan is 10 and voice vlan is 20.
how the configuration will look like..
is the port needs to be configured as trunk ?
regards
amit
02-11-2008 05:57 AM
Hi Amit,
I have not worked with Avaya IP Phones, but here are 3 threads with good switchport configs;
http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=Video%20over%20IP&CommCmd=MB?cmd=pass_through&location=outline@^1@@.1dd98f89/0#selected_message
Hope this helps!
Rob
02-19-2008 01:42 PM
Here is what I have done. You can use this for Avaya and Cisco phones. Most of this is auto qos voip trust configuration:
interface GigabitEthernet0/2
description Jack#1406 pp1-2 VP User
switchport access vlan 10
switchport mode access
switchport voice vlan 20
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
queue-set 2
mls qos trust cos
auto qos voip trust
spanning-tree portfast
Be aware that there aren't any Avaya phones capable of 1000baseTx.
06-21-2010 11:08 AM
Hi,
I have Cisco 3560 swithces and I am also looking to enable QOS for VOIP. Using Avaya.
Below is what I found. I would appreciate if someone can confirm.
ip cef distributed, and enable "auto qos voip trust" under the interface where the phones are connectd.
Thanks,
Nav
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide