Dot 1Q Trunking to a pair of CheckPoint IP 380

Unanswered Question
Feb 11th, 2008
User Badges:

Hi, I am having problems getting trunking working between 2 firewalls and 2 6506 switches (System image file is "sup-bootflash:s72033-psv-mz.122-18.SXD7.bin"

cisco WS-C6506-E (R7000) processor (revision 1.0)


I am dot1q trunking 2 vlans into the CheckPoint IP 380s and the odd thing is that once configured I am able to ping the vrrp addresses and both vip addresses of both subnets on the firewall however connectivity is lost between the firewalls and all other devices on these 2 subnets. (The pings enter the firewall via another physical interface which is the next hop towards the two subnets we're trunking to.)


The switch seems to think it is trunking, and the firewalls respond to the pings so think those nets are up, and yet it is plainly broken.


Any thoughts would be appreciated. Tx

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion