02-11-2008 03:42 AM - edited 03-05-2019 09:04 PM
am I right in saying all switches send bpdu's every 2 seconds? or is it just the root bridge that sends the initial bpdu and then each switch relays this every 2 seconds ?
02-11-2008 04:01 AM
Once a root switch is decided, the configuration bpdu's are sent only form the root bridge and other switches just propogate them as they are received.
Narayan
02-11-2008 05:27 AM
Just one small addition to Narayan's posting. The other switches propagate the BPDUs, but they do also add their own information each BPDU, such as adding to the path cost.
Kevin Dorrell
Luxembourg
02-27-2008 05:14 AM
what happens when a port goes up and down, does the switch send a tcn out to other switches, and do they propagate this to there neighbouring switches also ?
02-27-2008 05:37 AM
TCNs are directed towards the root switch and hence will be sent out of the root port.
Narayan
02-27-2008 12:35 PM
Hi,
Normal BPDUs is sent out from the root bridge every 2 sec, BPDU format include lots of fields like Bridge-ID, COST, hellow, forward delay timer , maxage timer, port-id ...
If a designated switch doesnt hear from a root within 20 sec , the root declared dead.
The root-bridge Sends TCA flag to all designated switches on their RPs.
The TCN is sent out RPs from the designated Switch twoard the root-bridge, IF the upstream switch is not the root, it will also mark the TCN and send it out its root port toward the root-bridge.
HTH
Mohamed
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide