Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
278
Views
0
Helpful
1
Replies

Clearing a 505 PIX

Go to solution
omgjames1
Level 1
Level 1

‎02-11-2008 11:20 AM - edited ‎03-03-2019 08:39 PM

What command would i use to clear all of the data in a 505 PIX? I want to keep the current IOS, but get rid of the routes and start fresh?

-J

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
JORGE RODRIGUEZ
Level 10
Level 10

‎02-11-2008 11:47 AM

To set it to factory defaults and keep PIX code issue.

PIX(config)#configure factory-default

or you can define an IP address of your choice for inside interface and all other configuration will be set to factory defaults.

e.g

PIX(config)#configure factory-default 10.10.10.1 255.255.255.0

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/c.html#wp1055799

rgds

Jorge

Jorge Rodriguez

View solution in original post

0 Helpful
1 Reply 1

Go to solution
JORGE RODRIGUEZ
Level 10
Level 10

‎02-11-2008 11:47 AM

To set it to factory defaults and keep PIX code issue.

PIX(config)#configure factory-default

or you can define an IP address of your choice for inside interface and all other configuration will be set to factory defaults.

e.g

PIX(config)#configure factory-default 10.10.10.1 255.255.255.0

http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/c.html#wp1055799

rgds

Jorge

Jorge Rodriguez
0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card