davetucker Tue, 02/12/2008 - 07:28

Not necessarily...


Unity performs fine in a multi-codec environment.


If Unity is currently configured for G.711 then you will need to make sure that calls coming into the Unity at from a remote site using G.729 are transcoded to G.711.


Please see the following document (contains configuration details and a good diagram)


http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmsys/a05dsp.html


Regards,


Dave

Jaime Valencia Tue, 02/12/2008 - 11:44

Hi


You may also enable support for G729 thru the advanced settings tool in the unity tools depot


HTH

Actions

This Discussion