02-12-2008 02:30 AM - edited 03-18-2019 08:27 PM
Hi to all,
If we change the codec in the call manager 4.2(3) in the regions from g711 to g729, do i have to do something else in the cisco unity 4.2(1)
regards
Alberto
02-12-2008 06:59 AM
Hi Alberto,
Yes, the required steps are outlined in this guide;
Changing the Cisco Unity Codecs
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/upgrade/guide/ex/ru_075.html
Hope this helps!
Rob
02-12-2008 07:28 AM
Not necessarily...
Unity performs fine in a multi-codec environment.
If Unity is currently configured for G.711 then you will need to make sure that calls coming into the Unity at from a remote site using G.729 are transcoded to G.711.
Please see the following document (contains configuration details and a good diagram)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/4_1_3/ccmsys/a05dsp.html
Regards,
Dave
02-12-2008 11:44 AM
Hi
You may also enable support for G729 thru the advanced settings tool in the unity tools depot
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide