IP communicator 2.1 SIP Config

Unanswered Question
Feb 12th, 2008
User Badges:

Hi all


We have are trying to configure the IP communicator softphone to test if it would connect to our SIP provider from a home based environment


We have managed to set up the TFTP server to upload all the necessary files but cannot see the application attempting to register, at a guess we are wondering if the configuration XML files are correct .


We have used other software applications that connect fine to the SIP provider on the same network so It's not a question of hardware Firewalls or Routing


IP communicator Software Ver 2.1

Cable modem

Fixed IP address

SIP Firmware SIP70-8-31s


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 1 (1 ratings)
Loading.
sadbulali Mon, 02/18/2008 - 07:26
User Badges:
  • Bronze, 100 points or more

BLF/Speed dial doesn't show the current status or state from the Directories of Placed calls, received calls or missed calls.


Administrator configures BLF/Speed dials for a CIPC phone in the same way as for a 7960/7970 IP phone.


None. CIPC 2.1(1) is planned to integrate this functionality.

Paolo Bevilacqua Mon, 02/18/2008 - 10:17
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Total random reply above, rated as such.

Actions

This Discussion