Can not get into the console on a CVPN 3005-E/FE

Unanswered Question
Feb 12th, 2008

No matter what cables I try, I can not get into a 3005 CVPN - any ideas of what connectors I need?

Thank you

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Richard Burts Tue, 02/12/2008 - 08:59

Brian

For the console of a 3005 VPN Concentrator you want a straight through serial (9 pin) cable - not the rolled cable that is common on IOS devices.

But I am wondering if you are talking about the console since the rest of the title of your question indicates E/FE. Perhaps you can clarify what the question is about?

HTH

Rick

cisco24x7 Tue, 02/12/2008 - 09:38

1- Use Teraterm or SecureCRT terminal app,

2- Connect a DB-9 connector to the the console

port of the VPNc,

3- Connect a DB-9 connector to the COM1 port

of the PC where Teraterm or SecurCRT runs,

4- set the setting to 9600/8/1/hardware,

5- connect one end of the ethernet cable to

the db-9 connected to the PC. The other end

should be connected to the DB-9 connected

to the VPNc.

Now you will get a login prompt

Easy right?

CCIE Security

Actions

This Discussion