desciphering 'sho policy-map'

Unanswered Question
Feb 13th, 2008
User Badges:

Hello, can anyone help me decipher the output of the show policy-map command?

For example:

#sho policy-map interface gigabitEthernet 3/2


class-map: abc-in (match-all)

Match: access-group name permit-any

set dscp 38:

Earl in slot 3 :

65458224006738 bytes

30 second offered rate 145067856 bps

aggregate-forwarded 65458224006738 bytes

My question is what each output is; Earl, offered rate, and aggregate-forwarded.


- TM

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Edison Ortiz Wed, 02/13/2008 - 16:21
User Badges:
  • Super Bronze, 10000 points or more
  • Hall of Fame,

    Founding Member

Earl stands for Encoded Address Recognition Logic.

It says you have an EARL in Slot3, so it must be a line card with a DFC in it.

The other 2 lines means, it has processed 145Mbps in the last 30 seconds with a total of 65458224006738 bytes since that class-map was applied.




e.maloney Thu, 02/14/2008 - 13:12
User Badges:

great! Thanks so much. After making some policy-map changes I can see it's working.

Thanks again,

- TM


This Discussion